FOAM BLAST® 332 - DyStar

FOAM BLAST^® 332

Yellowish Grey Liquid

Foam Blast 332 is a concentrated foam control agent that is effective against many commonly available antifoams. Foam Blast 332 works well in most pulping processes offering a product that will not cause problems downstream that are typical with mineral defoamers.

Product Details

Attribute	Value
Typical Properties
Viscosity (mPa-s) @ 25°C	2500 – 3500
Flash Point (°F) (PMCC )	>200
Density @ (kg/L) 25°C	0.965
Appearance	Yellowish Grey Liquid

Application Group	Application	Description
Household Care	Detergents	Mineral Oil free, silicone free foam control agent for use in detergent formulations
Paper	Paper Coating	Mineral Oil and Silicone free Synthetic foam control agent, with broad indirect food contact clearances, yielding excellent foam supression in paper coating formulations
Paper	Pulping	Mineral Oil and Silicone free Synthetic foam control agent, particularly effective in the pupling process

Other Industrial Foam Control - Synthetic Polyol

Industrial Foam Control – Synthetic Polyol

Search:

Product	Description
Foam Blast® 327	100% active multiple hydrophobe product designed for versatility and compatibility. Does not contain petroleum oils and will not cause swelling of rubber rollers or polymer print plates.
Foam Blast® 332	100% active product incorporating a blend of organic and synthetic materials. This pulping defoamer concentrate does not cause problems downstream and is effective in hot or cold applications over a broad pH range (1 to 10).
Foam Blast® 338	100% active product designed for ease of use and long term foam control at low levels compared to paraffinic oil-based defoamers used in inks and coatings. Proven effective as a foam control agent for polyvinyl alcohols. Generally more economical than silicone defoamers while offering similar or better performance.
Foam Blast® 349	100% active and highly effective grind defoamer at relatively low use levels, compared to mineral oil-based defoamers. Proven effective in low VOC systems and effective in high gloss sheens.
Foam Blast® 469	25% active synthetic emulsion product designed for quick foam suppression.
Foam Blast® 476	100% active product controls mechanical and biological foam. High spread rate for knockdown and excellent stamina. Works in most industrial and municipal effluent systems in digestors, aeration ponds, flumes and the river outfall. Also an effective paper machine defoamer.
Foam Blast® 550	100% active, particulate and silicone free product designed for aqueous and energy curable systems, i.e. UV curable oligomers, inks and coatings. Comparable or superior to silicone anti-foam compounds in foam control. Does not interfere with the application of top coats or adhesives to cured films. Reactive functionality becomes incorporated into the macromolecule as the film is cured.
Foam Blast® 590E	Developed for water-based coatings, adhesives and inks. Excellent age stability very low (less than 1%) VOC. Will not cause swelling of rubber rolls or flexographic printing plates.

Showing 1 to 8 of 8 entries